Tools

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT

- Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting - Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear derailleur hanger threads - Precise measuring gauge can be locked in place, so you don´t lose you measurement when you push it against the wheel in different positions

- Blade chrome plated, black anodised tip - Handle – polypropylene

- Designed to fit any 1/2" drive socket - Pro Socket Handle offers enough length (250mm tip-to-tail) for good leverage while still being compact enough to carry with you in your tool roll or tool case - Chrome-vanadium steel for high strength and chrome plated it for corrosion prevention - Spring-loaded ball bearing keeps whatever tool you're using from falling off

Use in conjunction with our Star Nut Setter to ensure the star nut is driven in straight. Compatible with 1" and 1 1/8" steerers.

Used for holding brake and derailleur steel cables and pulling them out of the housing The safety lock is activated with a thumb push. The lock is automatically released by squeezing handles together.

Professional wheel centering stand arm can get out of center after being used frequently. Controlling caliper arm enables us, to calibrate the stand arm back to its center position.

Set includes 6 pcs of arm for inner bearing dimensions 6.5-8,10-12, 12-15, 17-20, 22-28, 30-36 Used for pulling different types of bearings. The bearing is gripped from the inside side and pulled out.

- For unscrewing and tightening of front chain ring nuts - The dimension of the hexagonal key opening is SW10 - Material: premium flex plus carbon steel

The single sided cone wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

M10 - frame tap for derailleur hanger (616079) M5 - frame tap for water bottle, fender, rack bosses (616078) M3 - frame tap for rear wheel dropout alignment screws (616077)

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

- Hex wrenches 1.5, 2, 2.5, 3, 4, 5, 6

Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.

- Hex wrenches 4, 5, 6 - TX wrench 25 - PH1 screwdriver - Flat screwdriver 1.0 x 5.0

Two in one! Or six in three! We have three configurations of our double-sided spoke wrench to pick from. Similar in form to a traditional combination wrench, these spoke wrenches are great for the less common sizes you might run in to and allow you to be prepared while taking a minimum of space in your toolbox or work bench.

Features ball-end hex wrenches which are specially useful for working under angle

- Includes drifts for most common bearing sizes - Organized storage in a plastic case with our laser-cut SOS foam tray - Combine with our Bearing Puller for the best bearing service kit in the business

Unior, Bracket Socket BBR60, Bottom Bracket Tool, BBR60 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

Material: premium chrome vanadium steel

Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position

Unior, Bracket Socket T47, Bottom Bracket Tool, T47, PF30 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

The freewheel remover is used for removing an assembling Campagnolo® freewheels. Use the freewheel remover together with the Unior 1/2" ratchet 190.1ABI

Unior, Freewheel removal tool, Removal Tool, Compatible with Shimano, SRAM, Sachs, Sun Race Use with ½” wrench

The single sided headset wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

Precise design and hardened to stay sharp. 1695.1 is used to restore existing pedal threads and is available in set (left and right).

Unior Fork Seal Driver

The tool features an 8mm hex in the middle of it for those really stuck caps

Four sided spoke nipple engagement means fewer rounded off nipples. Offered in two sizes: 3.3mm and 3.45mm to fit most common spoke nipples, the 1630/2P spoke wrench has a plastic dipped handle for comfort and ease of use.

- This chain tool can cover anything from 5 to 11 speed - Its handle doubles in function as a valve core remover for Schrader and Presta valves