Other

The Profile Design Flip/Ergo platform is designed to give riders the freedom to find an optimal low stack position with the ability to hold the bar tops when climbing. There are 80 distinct position options achievable just by moving the armrests. As a clip-on bar it is also possible to adjust the extension width, length, and tilt easily. - 50a extensions offer a 50deg ski bend shape with a 7.5mm (per side) lateral shift - Extensions 340mm long and can be cut to size to suit nearly every rider - Bracket: Flip - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 112mm to 280mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -85mm to -17.5mm in 7.5mm steps - Armrest Stack: 40mm - Weight: 587g

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm

Replacement handlebar display unit specifically for your Townie GO! 7D bike. Product details: - 22.2mm handlebar mount - Compatible with Townie GO! 7D only

Wheels Manufacturing's SRAM compatible Universal Derailleur Hanger simplifies thousands of hanger designs into one universal standard. Machined completely out of aluminum, this new hanger is not only strong but designed to rotate backward and slip slightly in the case of an impact preventing chain jams and protecting the drive train. All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - Compatible with bike frames designed to accept the SRAM UDH (Universal Derailleur Hanger) - Compatible with all MTB and eMTB drivetrains - Machined aluminum body anodized black - Thru-Axle thread pitch M12 x 1

Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

Riser kits increase stack height to fit a wide range of riding styles for efficient positioning; compatible with ZBS Aerobars, T Plus Carbon Series Aerobars, T Plus Aluminum Series Aerobars, Supersonic Aerobars, Sonic Aerobars, and Subsonic Aerobars. - Multiple kits can be used to reach desired height up to 80mm rise - Raises armrest and extensions together to maintain a comfortable wrist position - Kit includes a pair of risers, bolts specific to riser size, and mounting hardware - Risers are compatible with J2, J3, and J4 Aerobar brackets - Clamp diameter: 31.8mm

- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Upgrade or refresh your Bontrager wheels. - Replacement axle end caps - Compatible with Bontrager Elite-level hubs

The Problem Solvers Center Lock Rotor Adapters are CNC-machined aluminum adapters that allow the use of 6-bolt rotors on Shimano's Center Lock hubs.

Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Key features: - Cable actuated remote lever for the Bontrager Drop Line dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Under Bar Lever is designed to ergonomically replace the left shifter on 1x drivetrains - Universal Lever is compatible with 1x, 2x, 3x drivetrains and left or right hand placement - Use with: Drop Line Seatpost

Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.

Get back on the trail with a quality replacement hanger. - Original equipment replacement rear derailleur hangers - Attachment hardware is sold separately Specifications: - Size: Rear drive side, 148x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut

These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. - 6mm length - Made in the US out of 7075-T6 Aluminum - Has hex heads on both the bolt and nut for easy installation - Max torque of 7-8 Nm with light grease on threads only

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Shimano Rear Derailleur Pulley Assemblies

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Profile Design’s Venturi Pads are the correct foam replacement pads for your Profile Design Century Aerobars (sold separately). They have adhesive on the bottom.

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g

Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments. - Follow laser-etched torque listing on collar