Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Pedals
$99.99
Our best flat pedal features replaceable traction pins and fully serviceable internals for lasting performance.
- Dial in your preferred traction with tunable pin placement and contact height
- Concave pedal body locks in foot placement for pedaling and descending
- Durable axle spins on sealed cartridge bearings
- Replaceable barbed traction pins
- Pedal body is made from 6061-T6 aluminum
- Install with 8mm hex wrench
$179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)
$93.99
Get ready to ride
Take your riding to the next level with Bontrager Comp MTB pedals. A fully adjustable release tension lets you dial in the right feel for your ride and adds the confidence and efficiency of a secure connection to your bike. Durable materials and sealed cartridge bearings ensure lasting performance for this SPD-compatible pedal. Cleats and hardware included.
- MTB pedals with dual sided SPD-compatible engagement
- Durable Chromoly spindle for long-lasting durability
- Sealed cartridge bearings provide smooth, reliable feel
- Adjustable release tension
- Includes cleats and mounting hardware
- Spindle: 9/16-inch
$21.99
When you need extra tread so your feet stay planted, Electra's Chopper Pedals are up to the task. With a durable pedal body and sturdy, smooth-spinning spindles, the Chopper Pedals give you the confidence you need in traffic or even on the trails.
- Spindle: 9/16-inch
$59.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
$59.99
The Stamp 1 Gen 2 pedals build upon the Stamp legacy with a true concave body design for enhanced on-trail confidence, trusted Igus internal components for durability, and a new one-piece pin design for maximum grip and easy pin replacement. Crafted with an uncompromising commitment to quality, the updated Stamp 1 boasts a robust nylon composite body and inherits the tried-and-true internals from the award-winning Stamp 7 flat pedals, keeping you supported lap after lap.
- Thin, concave profile - 13.5mm to 15.5mm pedal body height
- One-piece replaceable traction pins, 10 per pedal
- Upgraded, fully serviceable IGUS bearings and seal system
- Forged SCM 435 Chromoly Steel spindle
- Optimal size-specific surface area
- Platform dimensions: 114 x 114mm
- Large recommended for shoe sizes: 10-15 (US M) // 43.5-49 (EU)
$149.99
Dual-sided, SPD-compatible clipless MTB pedals with lightweight composite body for the fastest racers
CLIP INTO SPEED
With a lightweight composite body to help you fly up the hills, Kovee Pro Clipless Pedals deliver the control, confidence, and efficiency you crave from pedals. When weight and efficiency matters most, reach for Kovee Pro.
PRODUCT DETAILS
- Dual-sided, SPD-compatible XC MTB clipless pedals
- Fully adjustable clip in & clip out tension
- Lightweight composite body with knurling for added grip
- Dual sealed ball bearings with chromoly spindles for smooth spinning durability
- Install direction & torque spec listed on spindle
- Includes cleats and mounting hardware
$149.99
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
$99.99
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel.
Specs:
- Spindle material: Forged scm 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material: Stamped steel
- Spring material: 300 series stainless steel
- Release angle: 15° / 20°
- Q-factor: 52mm
- Inner bearing type: Igus LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Cleat: Premium brass cleats with shims included
- Weight: 355g per pair
- Warranty: 5 years
$83.99
Get ready to ride
Take your riding to the next level with Bontrager Comp road pedals. A fully-adjustable release tension lets you dial in the right feel for your ride and adds the confidence and efficiency of a secure connection to your bike. Durable materials and sealed cartridge bearings ensure lasting performance for this Look Keo-style pedal. Cleats and hardware included.
- Road pedals with Look KEO-style compatibility
- Durable Chromoly spindle for long-lasting durability
- Sealed cartridge bearings provide smooth, reliable feel
- Adjustable release tension
- Includes cleats and mounting hardware
- Spindle diameter: 9/16-inch
- Weight: 282g
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface.
- Optimal surface area
- Minimal profile 13mm thin
- 9 hex traction pins per side
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Body Material: Composite
- Footprint: 111mm x 114mm
- Hex Traction Pins: 9 per side (mounted from back)
- Inner Bearing Type: Igus LL-glide bearing
- Outer Bearing Type: Enduro cartridge bearing
- Shoe Size: US 5-10 // EU 37-43
- Spindle Material: Forged scm 435 chromoly steel
- Warranty: 5 years
- Weight: 329g per pair
$104.99
Bontrager Elite road pedals give you a secure, efficient, confidence-inspiring connection to your bike. They're built with a lightweight and durable composite body, fully adjustable release tension that lets you dial in the feel you want, and sealed cartridge bearings for lasting performance. Compatible with Look Cycle's KÉO brand cleats. Cleats and hardware included.
Fine-tuned Release
A fully-adjustable tension release bolt lets you dial in or out for the perfect feel. Thread the bolt clockwise to make it harder to release, or counter-clockwise for an easier release.
- Compatible with Look Cycle's KÉO brand cleats
- Lightweight and durable composite pedal body design
- Durable Chromoly spindle for long-lasting durability
- Sealed cartridge bearings provide smooth, reliable feel
- Adjustable release tension
- Includes cleats and mounting hardware
- Look and KÉO are trademarks of Look Cycle International. Look Cycle International has not endorsed or approved this pedal
- Spindle diameter: 9/16-inch
- Weight: 250g
$34.99
Confident and durable
The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with sealed cartridge bearings ensure lasting performance.
Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip.
- Durable nylon body with a proven shape for comfort and confidence
- Sturdy axle boosts durability and spins smoothly on sealed cartridge bearings
- Nylon traction pins provide forgiving, confident traction
- Simple to install with either 6mm hex or standard 15mm pedal wrench
$40.00
Secure your everyday cycling confidence and comfort in the essential urban pedal from LOOK. Geo City is a lightweight, upgradeable and affordable platform pedal but with all the style, quality and durability that’s made LOOK pedals the champion’s choice for decades, and the best out on the city streets today.
- Technology: Flat pedals
- Body: Composite
- Traction: Composite
- Spindle: Chromoly+
- Surface area: 110x107mm
- Weight (pedal): 165g
- Weight (pair): 330g
$19.99
Genuine replacement parts
Get your bike back on the trail with a fresh set of pedals.
Upgrade or refresh your ride.
- Nylon body and low profile
- Integrated reflectors can be removed
- Select colors available
- 9/16" spindle threading
$99.99
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface.
Details
- Optimal surface area
- Minimal profile 16mm thin
- 10 adjustable 8mm pins per side for grip
- 10mm pins available for purchase here
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU)
- Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU)
- Serviceable, pedal refresh kit available
Specs
- Adjustable pins: 10 per side
- Body Material: A380 Aluminum
- Endcap: T15
- Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large)
- Inner Bearing Type: Igus Bearing
- Max Rider Weight: No restriction
- Outer Bearing Type: Double Cartridge Bearing
- Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large)
- Spindle Material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 439g per pair (Small), 494g per pair (Large)
$139.99
Size specific magnesium platform pedal provides optimal shoe/pedal interface.
Details
- Magnesium pedal body for weight reduction
- Optimal surface area
- Minimal body profile - 16mm thin
- Concave pin profile & 10 adjustable pins per side for grip
- Premium bearings & seal system
- Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- Serviceable, pedal refresh kit found here
Specs
- Adjustable pins: 10 per side
- Body material: AM60B Magnesium Alloy
- Endcap: T15
- Footprint: 114mm x 111mm
- Inner bearing type: Igus Bearing
- Max rider weight: No restriction
- Outer bearing type: Double Cartridge Bearing
- Shoe size: US 10-15 // EU 43-49
- Spindle material: Forged SCM 415 Chromoly Steel
- Warranty: 5 years
- Weight: 386g per pair
$21.99
Throw a leg over your downtown commuter and push confidently with Electra's City Alloy Pedals. The full aluminum body means these pedals are lightweight and durable, while the grip material ensures your foot stays planted on the platform in all conditions.
$79.99
Dual-sided, SPD-compatible clipless MTB pedals have trail-worthy durability with the efficiency of clipless
CLIP INTO CONFIDENCE ON THE TRAIL
The Line Comp Clipless Pedals have a durable diecast aluminum cage to protect from rock strikes and give a confidence-inspiring platform for easily clipping in, all while quickly clearing mud and debris. These pedals are best for you if you want serious clipless trail pedals that don't break the bank.
PRODUCT DETAILS
- Dual-sided SPD-compatible trail MTB clipless pedals
- Fully adjustable clip in & clip out tension
- Durable die cast aluminum body & cage to protect against rock strikes
- The cage on trail pedals provides a platform for easily clipping in
- Dual sealed ball bearings with chromoly spindles for smooth spinning durability
- Install direction & torque spec listed on spindle
- Includes cleats and mounting hardware
$109.99
Dual-sided, SPD-compatible clipless MTB pedals with a perfect balance between durability and weight
CLIP INTO CONFIDENCE
Clip into the control and efficiency of clipless pedals. The Kovee Elite Clipless Pedals offer fully adjustable release tension that lets you dial in the right feel for your ride, while adding the confidence and control of clipless pedals. When you're after a balance of weight, durability, and style, reach for Kovee Elite.
PRODUCT DETAILS
- Dual-sided, SPD-compatible XC MTB clipless pedals
- Fully adjustable clip in & clip out tension
- Durable forged body with anodized plates for added durability
- Dual sealed ball bearings with chromoly spindles for smooth spinning durability
- Install direction & torque spec listed on spindle
- Includes cleats and mounting hardware
$19.99
One of the most successful and popular pedals, and for good reason.
The original Twisted PC is extremely simple, lightweight, inexpensive, and famously durable plastic-bodied design. Often duplicated but never replicated.
Features:
- High-strength nylon composite
- 16 pins per side
- Traditional looseball bearings
- Chromoly spindle
Specs:
- Width: 98mm
- Length: 89mm
$55.00
Grippy flat pedal for off-road riding
The ideal flat pedal, Shimano’s PD-GR400 delivers a perfectly balanced blend of low weight, grip, stability, and durability. Outfitted with nine removable pins per side, these lightweight resin composite body pedals keep your feet securely in place, while also permitting critical foot repositioning so you can maintain balance and control no what the trail throws at you.
Features
- The Shimano PD-GR400 are grippy flat pedals with a trail riding platform that’s stable and secure underfoot.
- Perfect Balance: Nine removable pins per side deliver balanced combination of grip and mobility.
- Ample Clearance: Low profile pedal body lessens chance of pedal strikes on rocks, roots, and other trail obstacles.
- Low Weight: Resin composite body keeps weight low at just 394 grams.
- Robust Performance: Chrome-molly spindle with 6mm hex wrench mount is strong and durable.
Ample Obstacle Clearance
Thanks to a low profile pedal body design (16 mm at center), these pedals are less likely to get hung up on rocks, roots, or other trail obstacles. This reduces the chance of pedal strikes, allowing you to stay focused and in command no matter how technical the terrain gets.
Plenty of Platform
Measuring a healthy 101 x 96 mm and built with a grippy contact surface area optimized for trail riding, Shimano’s GR-400 pedals provide a stable platform that’s secure underfoot. Confidence is further enhanced by nine removable pins per side, which assist in delivering the ideal balance of grip and mobility. The end result is a pedal that keeps your foot secure and engaged, but also allows you to reposition on the fly or stick a foot out if things get a little too rowdy.
$149.99
The exceptional comfort and versatility of the Speedplay Comp road pedal derive from its confidence-inspiring and stable platform, offering both value and performance mile after mile for cyclists of all levels. Precise engagement, effortless release, and dual-sided entry with the Easy Tension Cleat deliver ease of use and confidence to the rider.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
Versatile performance defines the advanced Speedplay system. Utilizing this innovative platform, Comp's confident engagement and stable platform provide benefits to riders at every level.
- Weight: 224g (per pedal pair)
- Spindle Material: Chromoly
- Spindle Length: 53mm
- Float: 5 to 15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$19.99
- One-piece resin body
- Juvenile size platform
- Boron spindle
- 390g pair
$19.99
- One-piece resin body with rubber surface for grip
- Boron spindle
- 446g pair
$179.99
Crank Brothers Mallet DH, the choice of DH world champions.
- Concave platform for secure foothold
- 8 adjustable pins per side for grip
- Traction pad technology customizable interface
- Ribbed body for better traction when unclipped
- Chamfered edges to reduce rock-strikes
- 57mm q-factor for stability at speed
- 4-sided entry / superior mud shedding
- Customizable float and release angle
- Premium bearings and double seal system
- Spindle material: Forged scm 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material cast: Stainless steel
- Spring material 300 series stainless steel
- Release angle 15° / 20°
- Max rider weight no restriction
- Q-factor 57mm
- Inner bearing type IGUS LL-glide bearing
- Outer bearing type enduro cartridge bearing
- Cleat premium brass cleats with shims included
- Adjustable pins 8 per side for grip
- Endcap hex alloy
- Weight: 479 grams
$179.99
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: 6061-T6 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- adjustable pins: 6 per side for grip
- endcap: hex alloy
- cleat: premium brass cleats with shims included
- weight: 419g per pair
$145.00
Chase your dreams with the KEO 2 MAX CARBON pedal. The large contact area offers perfect power transfer from your legs to your bike. The carbon body provides a lightweight, efficient platform, while the Chromoly+ axle offers reliability in all conditions. Install your pedal, adjust the tension, and you're ready to ride.
- Technology: Spring
- Cleats: Keo Grip
- Retention: 8 to 12
- Body: Carbon
- Spindle: Chromoly+
- Platform material: Stainless Steel
- Platform area: 500mm²
- Platform width: 60mm
- Q Factor: 53mm
- Stack height + cleats: 17.3mm (11 + 6.3mm)
- Weight (pedal): 125g
- Weight (pair + cleats): 312g
$12.99
Good things come in pairs.
Put your foot down!
Electra replacement pedals are perfect upgrades.
This updated design connects you to your bike with an efficient and lightweight pedal.
Product details:
- Nylon body
- 9/16" fits most bicycles with three-piece cranks
- Weight: 380g
$37.99
Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip.
Confident and durable
The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with dual bushings ensure lasting performance.
PRODUCT DETAILS
- Durable nylon body with a proven shape for comfort and confidence
- Sturdy axle boosts durability and spins smoothly on dual bushings
- Nylon traction pins provide forgiving, confident traction
- Simple to install with either 6mm hex or standard 15mm pedal wrench
Page 1 of 2
Next page