Parts & Accessories

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Pro Blendr is the ultimate computer integration system for clean and easy installation, made from durable alloy. - Blendr is an elegant, integrated accessory mounting solution - Alloy design provides clean and secure mounting of computers - Adapter pucks available for Wahoo and Garmin computers (sold separately) - Compatible with all Blendr bases - Attach your Garmin tether for an additional layer of security

Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

Genuine Bontrager cycling computer mounting accessories and replacement parts. - Ensure your computer stays properly in place. Replacement adapter for the Insta-Mount system - Universal mount permanently attaches to the back of your phone or other device - Use with Bontrager Trip mount for seamless Blendr capability

The adapter puck is required for mounting Wahoo head units to the Pro Blendr Alloy Computer Mount. - Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount and Wahoo Adapter Puck for secure mounting of your Wahoo head unit. Blendr is an elegant, integrated accessory mounting solution - For use with Wahoo head units and Pro Blendr Alloy Computer Mount - Removable design alloys quick and easy adapter puck replacement

Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

Our patent-pending integrated mount for the ELEMNT ROAM GPS bike computer is made of durable, lightweight plastic. It also comes with an optional locking screw that is UCI-compliant for connecting your ELEMENT ROAM to your bike for weigh-ins. - Fits 31.8mm round bars - Weight: 1.55 oz (44g) - Works exclusively with ELEMNT ROAM

Our stem mount for Wahoo ELEMNT GPS bike computers is made of lightweight, durable plastic and is a great solution for cyclists who prefer to keep their computer on top of the stem. - Fits any stem - Weight: 0.2oz - Works with ELEMNT, ELEMNT ROAM, ELEMNT BOLT, and ELEMNT Mini Note: BOLT loses aerodynamic advantage with this mount)

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected). - Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series - Li-Ion type - Capacity: 500 mAH |3.7Wh (± 2000km autonomy) - Rated voltage: 7.4V - Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately) - Fixing small parts included - Weight: 52g

BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation. - Measures up to 2.5mm elongation - Fits all chains including 11 speed - Handy electronic device - Stainless hardened metal body

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

Mounting for Shimano Di2

The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max combo mount is compatible with GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820) - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 60g

The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max XL combo mount is compatible with all Garmin Cycling Computers - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 63g

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black

A lightweight and highly adjustable mount for positioning any Garmin computer on aero bars. The pivoting two piece design offers multiple mounting positions based on aero bars, hydration systems and rider preference. - For 22.2mm diameter aero bar extensions - Compatible with all Garmin EDGE computers - Highly adjustable for multitude of mounting positions - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - GoPro Interface Compatible - Weight: 29g - Anodized Colors: Black, Red, Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Garmin 820, 520, 510, 500, 25, 20 - Fits Handlebars: 31.8MM - NOT GoPro Compatible - Anodized Color: Black, Red, Blue, Red/Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded. * Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME. The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties. Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc. - CNC Machined 6061-T6 Aluminum - Injection Molded Copolymer Interface - Compatibility: Wahoo ELEMNT - Lifetime Warranty - Weight: 18g - Anodized Colors: Black